As an Amazon Associate I earn from qualifying purchases.

Sturdy & durable: use high quality carbon steel for long life. Widely used: can be used to cut a variety of materials, rubber, laminate, composite materials, such as plywood, plastic, etc.

The circle hole saw can be easily installed on a handheld or vertical drill, Colour: Black. This wood hole cutter has a clear graduated surface for fast and accurate cutting.
5mm. If you have any questions before purchasing or are not 100% satisfied with the product, please feel free to contact us, and we will provide you with solutions as soon as possible. Wide range of application: adjustable circle hole saw has sharp teeth, plywood, which can quickly drill a smooth edge hole in wood, drywall, plastic, PVC, tile and other materials. Adjustable cutting tool cannot be used to cut concrete.

What’s in it: adjustable hole saw cutter, polycarbonate dust shield, rugged case. 2” to 10” 55 mm to 254 mm and cutting depth is up to 1 1/16” 27 mm with adjustable hex locknut and compression spring. High durability: rubber gasket provides surface protection against damage, tight seal against flat surfaces, and prevents fallout from debris.

Sturdy carry case:easy to carry, professionals and DIY home owners need to punch holes for recessed lights, it is a tool that carpenters, ceiling speakers and vents.

If you have any questions about the product, please feel free to contact us. Applicable to many materials it can be easily installed on both table drills and hand drills. We will reply within 12 hours. 20 in 1 the adjustable circle hole saw cutter set includes a custom tool box with handle, one auger type self-feeding pilot bit and one HSS pilot bit, an ABS dust cover, one set of HSS blades and two set of tungsten carbide blades, five brad-point wood drill bits and five Masenry drill bits, one Long Arm Hex Key Wrench, one Carpenter Pencil and one tape measure length is 3m.
It is recommended to use hss blade when cutting wood, rubber, plywood, particle board, laminate; use tungsten carbide blade when cutting drywall, plaster, plastic, fiberglass, acoustic tile, hardi board, Aluminum Composite Panels, MDF. During your hole drilling to the ceiling, it can collect most of the edge debris to make you more safe and convenient during the work. You can adjust yourself according to your needs to cut any diameter between 40mm to 200mm 1-5/8" to 8" and height 1-1/8" round holes.

Triple blade design, and ensure fine and clean cuts with their special, smooth cut, and burr-free.
Fine & clean cuts:the three triple tooth blades saw through plasterboard and softwood boards with ease, straight round effect, straight-set toothing. Adjustable diameters:this woodworking hole driller with adjustable multi diameters from 1. 77in to 5. 12in, makes it possible to cut holes of different diameters with just one tool, saving money and space.

Easy to carry & use: the adjustable hole cutter has a high density polyethylene carry case for easy storage and organizing, helping keep the parts in place.
Get ready to bring your kit anywhere. The cutting depth can reach up to 1-1/8"30 mm. The recessed hole saw can be easily installed on a bench drill and hand drill to improve work efficiency. The shield will trap dust and shavings, avoiding messes in your house while keeping you safe. Applicable to various materials: the adjustable hole saw is a practical set for carpenters, ceiling speakers, and other hole cutting applications.

Designed for professional use, the Heavy Duty Circle Cutter will make clean cuts from 1-3/4 to 7-7/8 inch diameter.

2 sets of user replaceable blades: high speed steel blades for wood, fiberglass, chipboard, plywood, laminates, plaster, plastics, acoustic tile, Hardi board, rubber; Tungsten Carbide blades for drywall, MDF. Adjustable hole saw cutter kit includes 1pc professional grade adjustable hole cutter with two replaceable pilot drill bits #45 steel, 10mm, 1pc carpenter pencil, 1pc adjustment hex wrench, 2 sets of replaceable cutting blades high speed steel blades + tungsten carbide blades, 1pc ABS dust shield, 5pcs brad-point wood drill bits and 5pcs Masonry drill bits4mm/5mm/6mm/8mm, 1pc 3m tape measure.
Our one adjustable drywall hole saw kit replaces of dozens of hole saws for faster, easier cutting of exactly the hole size needed. Two blades counter balance the cutter for low vibration. Adjustable twin blade hole cutter for cutting 1-5/8" to 8" 40 - 200mm holes in ceilings, Cutting depth up to 3/4"19mm from one side, walls and floors, 1-1/8"30mm from two sides.
1. Klein Tools
#ad
Klein Tools 53731 Hole Saw, Adjustable Saw Cutter with Dust Shield for Cutting Drywall and Ceiling Tile for Recessed Lights
#adKlein Tools #ad - Blades adjust to cut holes from 2 to 7-Inch diameter. No additiol tools needed to adjust the hole saw. Fits most 3/8-inch and 1/2-Inch drill chucks. No binding while cutting. Hole saw quickly and smoothly cuts cleaner holes in drywall and ceiling tiles.More information #ad
Brand | Klein Tools #ad |
Manufacturer | Klein Tools #ad |
Height | 3 Inches |
Length | 7 Inches |
Weight | 0.31 Pounds |
Width | 7 Inches |
Part Number | 53731 |
Model | 53731 |
More information #ad
2. Luomorgo
#ad
Luomorgo 1 3/16" to 12" Adjustable Hole Saw Circle Cutter Drill Bit Tool Saw Round Cutting for Drywall Wood
#adLuomorgo #ad - Cutting hole diameter: 1-3/16" - 12"30 - 300mm, cutting depth: 1/8 "-2"3 - 50mm, Shank Diameter: 3/8" 10mm. The valve body has a clear scale for fast measurement and precise cutting.Sturdy & durable: use high quality carbon steel for long life. Widely used: can be used to cut a variety of materials, rubber, laminate, composite materials, such as plywood, plastic, etc.
More information #ad
Risk-free shopping: if you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a satisfied shopping experience. Package includes: 1 x adjustable hole saw cutter, 1 x drill bit, 1 x hex wrench.Brand | Luomorgo #ad |
Manufacturer | Luomorgo #ad |
Weight | 0.22 Pounds |
Part Number | HAOK20190100000261 |
Model | HAOK20190100000261 |
More information #ad
3. Aracombie
#ad
1-3/16 Inch to 12 Inch Circle Hole Cutter Round Wood Cutter, Aracombie Adjustable Hole Saw for Wood, Adjustable Drywall Hole Saw Cutter Drill Bit Tool for Plaster Plastic Plywood 30mm to 300mm
#adAracombie #ad - Cost-effective: the circle hole cutter cut to a depth of approximately 1/8 - 2 inch / 3mm - 50mm. After-sales guarantee: aracombie has a 24-hour human customer service. The round drywall cutter can freely adjust the cutting range, decorators, which is very suitable for woodworking, DIY enthusiasts, and craftsmen to buy and use.The circle hole saw can be easily installed on a handheld or vertical drill, Colour: Black. This wood hole cutter has a clear graduated surface for fast and accurate cutting.
More information #ad
Material: drywall hole saw is made of high quality carbon steel, which is wear-resistant and durable. Package contains: 1 x adjustable hole cutter, cutting depth: 1/8 - 2 inch / 3mm - 50mm, 1 x drill bit, 1 x Hex Wrench, adjustable cutting range: 1-3/16 - 12 Inch / 30mm - 300mm, Shank Diameter: 3/8 inch / 9.55mm. If you have any questions before purchasing or are not 100% satisfied with the product, please feel free to contact us, and we will provide you with solutions as soon as possible. Wide range of application: adjustable circle hole saw has sharp teeth, plywood, which can quickly drill a smooth edge hole in wood, drywall, plastic, PVC, tile and other materials. Adjustable cutting tool cannot be used to cut concrete.
Brand | Aracombie #ad |
Manufacturer | Aracombie #ad |
Part Number | AST220218-1101 |
More information #ad
4. JONARD TOOLS
#ad
Professional Grade Round Hole Saw Cutter, Adjustable Hole Size 2.2” to 10”, Jonard Tools AHC-10, Cuts Plywood Plasterboard Sheetrock Acrylic Up to 1 1/16” Thick, Includes Dust Shield and Case
#adJONARD TOOLS #ad - Versatile use: cuts round holes in plywood, sheetrock, plasterboard, and acrylic sheet up to 1 1/16” 2.7 cm thick and can be used with any variable speed drill.What’s in it: adjustable hole saw cutter, polycarbonate dust shield, rugged case. 2” to 10” 55 mm to 254 mm and cutting depth is up to 1 1/16” 27 mm with adjustable hex locknut and compression spring. High durability: rubber gasket provides surface protection against damage, tight seal against flat surfaces, and prevents fallout from debris.
More information #ad
Safe operation: tool has a compression spring that absorbs vibrations while cutting and polycarbonate transparent dust shield collects dust and prevents chips from flying into eyes while cutting. Adjustable size: cuts hole sizes from 2.Brand | JONARD TOOLS #ad |
Manufacturer | Jonard Tools #ad |
Weight | 5.61 Pounds |
Part Number | AHC-10 |
Model | AHC-10 |
More information #ad
5. Amartisan
#ad
With ABS Dust Shield for recessed Lights, Ceiling Speakers, 1-5/8" to 8" 40, 200mm Adjustable Hole Saw Cutter, Vent Holes, Amartisan Hole Cutter
#adAmartisan #ad - Scope of application:cuts plywood, veneer, ceiling tiles, cement board, slate, sheetrock, etc. Hole cutter kit:it is a very practical tool set with dozens of hole saws that make it faster, safer and easier to cut the required hole size.Sturdy carry case:easy to carry, professionals and DIY home owners need to punch holes for recessed lights, it is a tool that carpenters, ceiling speakers and vents.
More information #ad
Dustproof design: abs dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. Size adjustable:double blade hole cutter applied 1-5/8" to 8" 40 - 200mm holes with depth up to 3/4"19mm from one side, 1-1/8"30mm from two sides.Brand | Amartisan #ad |
Manufacturer | AMARTISAN #ad |
Height | 4.9 Inches |
Length | 12 Inches |
Width | 10 Inches |
Part Number | Hole Saw |
Model | Hole Saw |
More information #ad
6. Lunarlipes
#ad
Speaker Holes or Ventilation Holes, Adjustable Hole Saw Cutter Kit 1-5/8" to 8" 40-200mm Twin Blade Hole Saw with ABS Dust Shield for Making recessed Lights
#adLunarlipes #ad - Subversive design our adjustable hole saw - cutter set gives the hole saw an ABS guard with a rubber gasket for a better fit. 100% money-back guaranteefor any reason you are not satisfied, you can request a free replacement or a full refund. Infinitely adjustable the circle hole cutter set is designed with double cutter head rotary cutting.If you have any questions about the product, please feel free to contact us. Applicable to many materials it can be easily installed on both table drills and hand drills. We will reply within 12 hours. 20 in 1 the adjustable circle hole saw cutter set includes a custom tool box with handle, one auger type self-feeding pilot bit and one HSS pilot bit, an ABS dust cover, one set of HSS blades and two set of tungsten carbide blades, five brad-point wood drill bits and five Masenry drill bits, one Long Arm Hex Key Wrench, one Carpenter Pencil and one tape measure length is 3m.
More information #ad
It is recommended to use hss blade when cutting wood, rubber, plywood, particle board, laminate; use tungsten carbide blade when cutting drywall, plaster, plastic, fiberglass, acoustic tile, hardi board, Aluminum Composite Panels, MDF. During your hole drilling to the ceiling, it can collect most of the edge debris to make you more safe and convenient during the work. You can adjust yourself according to your needs to cut any diameter between 40mm to 200mm 1-5/8" to 8" and height 1-1/8" round holes.
Brand | Lunarlipes #ad |
Manufacturer | U/D #ad |
Part Number | Hole Saws kit |
Model | Hole Saws kit |
More information #ad
7. YUNWEI
#ad
Thin Metal, Improve Your Commercial and Domestic Works Efficiency, Adjustable Punching Saw E901 Adjustable Hole Driller Suitable for Drywall Materials, Plastic
#adYUNWEI #ad - Only one drill bit is needed for round holes of different sizes and diameters. Compatible tools: the hole saw is 039 inch acceptable for all standard power drills and cordless screwdrivers, while the power drill can be used on gypsum plasterboard, softwood, OSB panel, Attention: The cordless screwdriver is only suitable for drilling on gypsum plasterboard, plywood and more.Triple blade design, and ensure fine and clean cuts with their special, smooth cut, and burr-free.
More information #ad
Multiple use:widely used in woodworking opening, spotlight opening, plastic plate opening, etc, DIY speaker opening, but not for glass and metal. Easy to use:loosen the 3 screws in the middle, then adjust the diameter of the hole you want and finally tighten these 3 screws to start drilling. Fine & clean cuts:the three triple tooth blades saw through plasterboard and softwood boards with ease, straight round effect, straight-set toothing. Adjustable diameters:this woodworking hole driller with adjustable multi diameters from 1. 77in to 5. 12in, makes it possible to cut holes of different diameters with just one tool, saving money and space.
Brand | YUNWEI #ad |
Manufacturer | YUNWEI #ad |
Part Number | Kingdoms-0976 |
More information #ad
8. VEVOR
#ad
Vent Holes, VEVOR Adjustable Hole Saw Cutter Kit, Recessed Hole Saw with PC Dust Shield, Ceiling Speakers, Two Replaceable Pilot Drill Bits, for Recessed Lights, 1-5/8" to 11-13 /16" 40-300 mm
#adVEVOR #ad - Get ready to feel the difference with every cut. Widely used to cut plywood, contractors, veneer, cement board, sheetrock, vent holes, home decorators, and DIY home owners for recessed lights, etc. Adjustable hole saw cutter kit: this kit includes 1 x adjustable hole saw, 5 x masenry drill bits, 1 x carpenter pencil, 1 x set of Tungsten Carbide Blades, 1 x Storage Box, 1 x PC Dust Shield, 1 x Auger Type Self-Feeding Pilot Bit, 5 x brad-point wood drill bits, 1 x set of hss blades, 1 x HSS Pilot Bit, 1 x hex key wrench, 1 x 3 m Tape Measure.Easy to carry & use: the adjustable hole cutter has a high density polyethylene carry case for easy storage and organizing, helping keep the parts in place.
More information #ad
Dustproof & protective: are you tired of getting dust in your eyes? well, we got the perfect solution! Our adjustable hole saw cutter kit provides an PC dust shield with a soft rubber gasket for a better fit. Cut hole size adjustable: the adjustable circle hole saw cutter can cut holes with a diameter from 1-5/8" to 11-13 /16" 40 - 300 mm, and you can adjust it yourself as needed. Get ready to bring your kit anywhere. The cutting depth can reach up to 1-1/8"30 mm. The recessed hole saw can be easily installed on a bench drill and hand drill to improve work efficiency. The shield will trap dust and shavings, avoiding messes in your house while keeping you safe. Applicable to various materials: the adjustable hole saw is a practical set for carpenters, ceiling speakers, and other hole cutting applications.
Brand | VEVOR #ad |
Manufacturer | VEVOR #ad |
Height | 6 Inches |
Length | 16 Inches |
Weight | 8.6 Pounds |
Width | 16 Inches |
Part Number | Adjustable Hole Saw Cutter 1.6"to11.8" |
Model | Adjustable Hole Saw Cutter 1.6"to11.8" |
More information #ad
9. General Tools
#ad
General Tools 55 Heavy Duty Circle Cutter. Adjustable 1-3/4 Inch to 7-7/8 Inch
#adGeneral Tools #ad - The tempered steel body features marked graduations on the beam for fast measurement and application. All adjusments are made with a hex wrench which is included; Replacement blade is General Tools Model # 55 Blade, replacement drill is General Tools Model # 5/6/55 Drill.Designed for professional use, the Heavy Duty Circle Cutter will make clean cuts from 1-3/4 to 7-7/8 inch diameter.
More information #ad
This round shank circle cutter is great for making smooth cuts through most materials, composite, including wood, sheet metal and more; Shank is 1/2 inch round.55 heavy duty circle cutter is designed with a 1/2 shank for drill press use only; Maximum safe speed is 500 RPM.Brand | General Tools #ad |
Manufacturer | General Tools #ad |
Height | 1 Inches |
Length | 5.5 Inches |
Weight | 0.74 Pounds |
Width | 4 Inches |
Part Number | 55 |
Model | 55 |
More information #ad
10. Toolly
#ad
Toolly 1-5/8" to 8" 40-200mm Adjustable Circle Hole Saw Cutter, Twin Blade Hole Saw for Recessed Lights Ceiling in Recessed Drywall & Ceiling Tile
#adToolly #ad - Ball bearing mounted abs dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is a ideal practical tool set for carpenters, home decorators, safer, professionals and DIY home owners.2 sets of user replaceable blades: high speed steel blades for wood, fiberglass, chipboard, plywood, laminates, plaster, plastics, acoustic tile, Hardi board, rubber; Tungsten Carbide blades for drywall, MDF. Adjustable hole saw cutter kit includes 1pc professional grade adjustable hole cutter with two replaceable pilot drill bits #45 steel, 10mm, 1pc carpenter pencil, 1pc adjustment hex wrench, 2 sets of replaceable cutting blades high speed steel blades + tungsten carbide blades, 1pc ABS dust shield, 5pcs brad-point wood drill bits and 5pcs Masonry drill bits4mm/5mm/6mm/8mm, 1pc 3m tape measure.
More information #ad
Our one adjustable drywall hole saw kit replaces of dozens of hole saws for faster, easier cutting of exactly the hole size needed. Two blades counter balance the cutter for low vibration. Adjustable twin blade hole cutter for cutting 1-5/8" to 8" 40 - 200mm holes in ceilings, Cutting depth up to 3/4"19mm from one side, walls and floors, 1-1/8"30mm from two sides.
Brand | Toolly #ad |
Manufacturer | Puyi #ad |
Height | 5.91 Inches |
Length | 13.78 Inches |
Width | 12.99 Inches |
Part Number | KR0025 |
Model | KR0025 |
More information #ad